top of page

2. Add Power

AVA PoE Setup

The USB-C positioned centrally on the device (third from left) is designated for power.


When using Power over Ethernet, make sure to use the correct cable in accordance to IEEE802.3af Standard for PoE (any Category of Ethernet cable from Cat5e upwards).


  1. Make sure your ethernet cable (IEEE802.3af) is connected to a powered switch

  2. Connect this ethernet cable to the AVA Ethernet to USB-C Adapter (PoE)

  3. Plug the USB-C of the adapter into the central port in the back of the AVA Nano Brain

2. Add Power
bottom of page